Description
TLC2206P Tuya Water Tank Level Monitor offers the advantage of providing accurate and real-time monitoring of water levels. It also allows remote monitoring, reducing the need for physical inspections. Its easy installation and user-friendly interface make it a reliable solution for home and industrial use. Overall, it is a convenient and efficient tool for managing water resources.
- LONG MEASURING DISTANCE: 10cm to 2.9m meters from the sensor, which is suitable for different tanks.
- POWER ADAPTER: Input: 100-240V AC Output: 9V DC
- WIFI SIGNAL: The indicator needs to be connected to router to get wifi signal.
- SAFETY AND HIGH RELIABILITY: IP67 waterproof. CE,Rohs and Reach certification
- REMOTE OIL TANK MONITORING: Check your tank level from display screec and smartphone.No need to open the tank from time to time.
- FULL AND LOW LEVEL ALERTS: You will receive message alerts when it is full or low level. Or set the alarm level by app
- EASY TO INSTALL: There is a nut to install the sensor.Install the sensor on top of the tank.
- OPERATING TEMPERATURE: -10℃~+70℃,suitable for most weather conditions.
- ONE YEAR WARRANTY: EPTTECH has provided liquid detection solution for over 20 years with good service.
The signal between the sensor and the indicator is RF433Mhz, and the distance between them can reach about 250 meters in open space. The indicator communicates with the mobile phone through WIFI. With the indicator,it is suitable for sensors installed where WiFi cannot be spread or weak.
Sensor Detail
The sensor probe and internal circuit board are waterproofed with glue, and the sensor connector is also waterproof.
Application scenarios
The maximum installation height of the sensor is 3 meters. The opening is installed on the top of the water tank. The non-contact measurement method should be kept at a distance of more than 0.1 meters from the highest liquid level. It is suitable for water tank level monitoring of any material below 3 meters.
The maximum installation height of the sensor is 3 meters. The opening is installed on the top of the water tank. The non-contact measurement method should be kept at a distance of more than 0.1 meters from the highest liquid level. It is suitable for water tank level monitoring of any material below 3 meters.